Tungsten Carbide Heading / Forging Dies / Tooling

Carbide Heading Dies

We are manufacturers and suppliers of all types of Carbide Heading Dies. These dies are used for Cold forging and Hot forging.

The material used in dies is Hot Die Steel (HDS) of grade H11 and H13 for outer casing and the insert is of Tungsten Carbide. Depending on the application, different grades of Tungsten Carbide are used such as GT55, GT40, GT30, GT20, G50, G40, G30, G20 etc. consisting of 25% or 20% or 15% or 12% Cobalt.

The carbide inserts are Cold Pressed or Shrink Fitted or taper fitted again depending on application or customer requirement.

The Carbide Heading Dies are with plain hole, Pointing, extrusion, trap extrusion, Hexagonal, Hex extrusion, flat extrusion, trilobular for different fasteners, screws and bolts. Fasteners can be of mild steel, stainless steel, high tensile fasteners of alloy steels. The carbide dies can be used for full thread, half thread bolts/screws. They can be socket head, hex head, counter sunk head, carriage bolt, roof bolt, coach screws, trilobular screws or other special screws/bolts.

Carbide Heading Dies are made to close tolerances as per customer drawings to give long life.

Segmental Dies

We are manufacturers and suppliers of all types of Carbide Segmented Dies and Punches. These dies are used for Cold forging and Hot forging.

The material used in dies is Hot Die Steel (HDS) of grade H11 and H13 for outer casing and the insert is of Tungsten Carbide. Depending on the application, different grades of Tungsten Carbide are used such as GT55, GT40, GT30, GT20, G50, G40, G30, G20 etc. consisting of 25% or 20% or 15% or 12% Cobalt.

The carbide inserts are Cold Pressed or Shrink Fitted or taper fitted again depending on application or customer requirement.

Carbide Segmental Dies or Segmented Carbide dies and punches can be of Hex or Hexagonal, square or even round shape. These dies are used for making Flange Screws / bolts, carriage bolts or any other type of special fastenrs. These can be with washer face or without washer face. These are supplied as inserts only or complete punch as required by the customers.

Carbide Dies are made to close tolerances as per customer drawings to give long life.

Trimming Dies

We are manufacturers and suppliers of all types of Trimming Dies / Trim Dies. These dies are used for Cold forging and Hot forging.

The material used in dies is High Speed Steel / HSS of different grades M2 / 1.3343 / SKH59, M35 or M42. Dies are heat treated to 60 – 62 HRc to give good life.

These dies are used for manufacturing of fasteners / bolts / screws of different head shapes like Hex Head, Round Head, Collar Bolt, Octagonal, 12-corner, T shape or any other special shape as required by the customer.

The dies are normally made on press by cold pressing the shape. Special shapes are made on Wire EDM, Electrode EDM, Wire Cut.